Button Scanner NBA scans all of the unlocked, visible buttons on the current card, highlighting each one in sequence. When you press the mouse button, the space bar or one of the number keys 0 - 3, Button Scanner activates the highlighted button. Adaptive switches can be used along with a device that can emulate a mouse click or the number keys 0 - 3. Button Scanner NBA was designed for and tested with the Macintosh Switch Interface from Don Johnston, Incorporated (1-800-999-4660).
SCAN DELAY - The time between scanning buttons. Enter the desired scan delay time in ticks (1/60th second). A value of 60 would equal a scan delay of 1 sec., 90 = 1.5 secs., 120 = 2 secs., etc.
RESET DELAY - The minimum time between switch hits (helps prevent accidental activation of a button). Enter the desired reset time in ticks.
AUDIBLE SCAN - Plays a sound when scanning as long as the sound is already part of the stack. To use, select ΓÇ£Current ResourceΓÇ¥ then enter the name of the sound in the ΓÇ£Sound Name:ΓÇ¥ field.
SKIP BUTTONS - Skips a named button (usually the one that activates the script). The button that contains Button Scanner NBA will be skipped automatically. Use this option to skip a button that calls Button Scanner NBA from HyperLogo. Select ΓÇ£Skip Named ButtonΓÇ¥ then enter the name of the button in the ΓÇ£Button Name:ΓÇ¥ field.
Press the 'esc' key to stop the scanning. If Button Scanner NBA is called from a repeating Magic button press <option - esc> to stop the scanning. After that, you can work with the buttons as you normally would.
For information on the comprehensive Button Scanner NBA tutorial contact:
